No-Twist Clips
Note:
All dimensions are with clip secured to flat surface as normally mounted with component of nominal diameter in place.
Clips below are listed by increasing length (U)
Part Number
Nom.
Dia.
Min.
Dia.
Max.
Dia.
U
± .010
W
± .005
A
± .020
B
± .020
C
± .020
V
± .005
100-233-1
.375
.355
.385
.375
.016
.450
.400
.300
.100
100-233-2
.500
.480
.510
.375
.016
.610
.530
.370
.100
100-233-3
.625
.615
.635
.375
.016
.740
.640
.470
.100
100-233-5
.875
.855
.885
.625
.020
1.080
.950
.600
.130
100-233-6
1.000
.980
1.010
.625
.020
1.220
1.060
.660
.130
Features
Quick attachment to mounting surface with one eyelet or rivet.
Integral projections on bottom of clip eliminate twisting.
Holding power increases as shock and vibration increase, measured by force required to remove component.
Special contour design acquires closer set to component during shock and vibration, increasing security without localized pressure.
Will withstand over 100 insertion-withdrawals of a slug 1/32" larger than nominal diameter, without metal fatigue.
Government Specifications
Material:
Spring Steel (MIL-S-46049B) (S.A.E. 1074)
Plating:
Cadmium (QQ-P-416), Silver (QQ-S-365), Zinc (QQ-Z-325), Tin (MIL-T-10727), Nickel (QQ-N-290), Electroless Nickel (MIL-C-26074), Black Matte (MIL-F-495)
Finishes Available
Standard:
Cadmium Chromate (Golden)
Optional:
Cadmium Chromate (Golden), Silver (Tarnish Resistant), Cadmium Chromate (clear), Silver, Nickel, Black Matte, Hot Tin Dip, Electro Tin
Atlee Home
Clips Home
Call, FAX, or E-Mail us with your requirements.
We guarantee you a quick and courteous response!
978-681-1003
Atlee of Delaware, Inc.
10 Bayfield Drive
North Andover, MA 01845
978-686-2934
sales@atlee.com
Developed and maintained by
Mathbox. Inc.
Send comments to
webmaster@mathbox.net
Copyright 1998 Mathbox, Inc.