Note: All dimensions are with clip secured to flat surface as normally mounted with component of nominal diameter in place.
   
  Clips below are listed by increasing length (U)
   
  Part Number    Nom. 
 Dia.		  Min. 
 Dia.		  Max. 
 Dia.		 U
 ± .010 		 W
 ± .005 		 A
 ± .020 		 B
 ± .020 		 C
 ± .020 		 V
 ± .005 
100-233-1 .375 .355 .385 .375 .016 .450 .400 .300 .100
100-233-2 .500 .480 .510 .375 .016 .610 .530 .370 .100
100-233-3 .625 .615 .635 .375 .016 .740 .640 .470 .100
100-233-5 .875 .855 .885 .625 .020 1.080 .950 .600 .130
100-233-6 1.000 .980 1.010 .625 .020 1.220 1.060 .660 .130
 
Features
  1. Quick attachment to mounting surface with one eyelet or rivet.
  2. Integral projections on bottom of clip eliminate twisting.
  3. Holding power increases as shock and vibration increase, measured by force required to remove component.
  4. Special contour design acquires closer set to component during shock and vibration, increasing security without localized pressure.
  5. Will withstand over 100 insertion-withdrawals of a slug 1/32" larger than nominal diameter, without metal fatigue.
 
Government Specifications
Material: Spring Steel (MIL-S-46049B) (S.A.E. 1074)
Plating: Cadmium (QQ-P-416), Silver (QQ-S-365), Zinc (QQ-Z-325), Tin (MIL-T-10727), Nickel (QQ-N-290), Electroless Nickel (MIL-C-26074), Black Matte (MIL-F-495)
 
Finishes Available
Standard: Cadmium Chromate (Golden)
Optional: Cadmium Chromate (Golden), Silver (Tarnish Resistant), Cadmium Chromate (clear), Silver, Nickel, Black Matte, Hot Tin Dip, Electro Tin
 
 
Atlee Home Clips Home
 
Call, FAX, or E-Mail us with your requirements.
We guarantee you a quick and courteous response!
phone.gif (285 bytes)   978-681-1003
fax.gif (289 bytes)   978-686-2934
email.gif (270 bytes)   sales@atlee.com
Atlee of Delaware, Inc.
10 Bayfield Drive
North Andover, MA 01845
ISO9001:2000 Registered
Hosted By Mathbox Developed and maintained by Mathbox. Inc.
Send comments to webmaster@mathbox.net
Copyright 1998  Mathbox, Inc.