Note: Tolerances are ± .005 except for holes, which are ± .003.
See optional Materials and Finishes.
  Part Number   Comment
102-317-0 See Figure A
102-317-1 See Figure B
102-317-2 See Figure C
102-317-3 See Figure D
 
 
Application Data
Atlee Transistor Clips are specified when a transistor must be mounted securely without depending on soldered leads and at the same time must have its heat of operation efficiently dissipated. These devices act as effective heat sinks for rapid transfer of component heat the equipment chassis. Attachment to the mounting surface is by means of rivets, eyelets, screws and nuts, or similar fasteners.
 
Features
  1. Secure mounting, without resonance at any vibration frequency from 20 CPS through 2000 CPS.
  2. Effective heat dissipation, permitting operation of transistors at maximum ratings without shortening life.
  3. Holding power increases as shock and vibration increase, measured by force required to remove component.
 
Materials: Copper (ASTM B 152)
 
Plating: Cadmium
 
Finishes Available
Standard: Cadmium
Optional: Cadmium Chromate (Golden), Silver (Tarnish Resistant), Cadmium Chromate (clear), Silver, Nickel, Black Matte, Hot Tin Dip, Electro Tin
 
 
Atlee Home Clips Home Transistor Clips Home
 
Call, FAX, or E-Mail us with your requirements.
We guarantee you a quick and courteous response!
phone.gif (285 bytes)   978-681-1003
fax.gif (289 bytes)   978-686-2934
email.gif (270 bytes)   sales@atlee.com
Atlee of Delaware, Inc.
10 Bayfield Drive
North Andover, MA 01845
ISO9001:2000 Registered
Hosted By Mathbox Developed and maintained by Mathbox. Inc.
Send comments to webmaster@mathbox.net
Copyright 1998  Mathbox, Inc.