Tab Mounted Clips
Note:
All dimensions are with clip secured to flat surface as normally mounted with component of nominal diameter in place.
Parts are shipped with tabs bent down at 60°.
Clips below are listed by increasing length (U)
Part Number
Nom.
Dia.
Min.
Dia.
Max.
Dia.
U
± .010
W
± .005
A
± .020
B
± .020
C
± .020
F
± .005
M
± .005
108-325-1
.170
.150
.180
.476
.010
.250
.200
.130
--
--
108-325-2
.235
.215
.245
.476
.010
.320
.260
.170
--
--
108-325-3
.312
.302
.332
.476
.010
.380
.340
.210
--
--
108-325-4
.400
.380
.410
.476
.016
.480
.420
.280
--
--
108-325-5
.500
.480
.510
.476
.016
.610
.530
.320
--
--
108-325-6
.625
.605
.635
.940
.016
.820
.720
.430
.200
.400
108-325-7
.750
.730
.760
.940
.020
.930
.810
.490
.200
.400
108-325-8
.875
.855
.885
.940
.020
1.130
.930
.570
.300
.600
108-325-9
1.000
.980
1.010
.940
.020
1.220
1.060
.630
.300
.600
Application Data
Atlee tab-mounted clips are designed for use with printed circuit boards, to provide firm holding of capacitors, resistors, relays, and similar cylindrical components against shock and vibration. Attachment of the clip to the board is be means of integral tabs which pass through the board and clinch against its lower surface. Tabs are annealed to take 5 90° bends without breaking.
Features
Designed for manual or automatic assembly.
Mounting tabs spaced for 3/64" diameter holes on 0.1" grids.
No visible shifting of component under vibration at 500 CPS with 90 G peak acceleration, and 2000 CPS with 65 G peak acceleration.
No visible shifting of component during impact shocks of 200 G at right angles to and also along the axis of the component holder.
Holding power increases as shock and vibration increase, measured by force required to remove component.
Special contour design acquires closer set to component during shock and vibration, increasing security without localized pressure.
Will withstand over 500 insertion-withdrawals of a slug 1/32" larger than nominal diameter, without metal fatigue.
Government Specifications
Material:
Beryllium Copper (QQ-C-533)
Plating:
Plating:
Cadmium (QQ-P-416), Silver (QQ-S-365), Zinc (QQ-Z-325), Tin (MIL-T-10727), Nickel (QQ-N-290), Electroless Nickel (MIL-C-26074), Black Matte (MIL-F-495)
Finishes Available
Standard:
Electro Tin
Optional:
Cadmium Chromate (Golden), Silver (Tarnish Resistant), Cadmium Chromate (clear), Silver, Nickel, Black Matte, Hot Tin Dip, Electro Tin
Atlee Home
Clips Home
Call, FAX, or E-Mail us with your requirements.
We guarantee you a quick and courteous response!
978-681-1003
Atlee of Delaware, Inc.
10 Bayfield Drive
North Andover, MA 01845
978-686-2934
sales@atlee.com
Developed and maintained by
Mathbox. Inc.
Send comments to
webmaster@mathbox.net
Copyright 1998 Mathbox, Inc.